WCE goes a step further, providing lightning service, and reducing time for heavy vehicle repairs from 19 days to only 4 days.

West Coast Engineering Co., Ltd. has provided repair services for a vehicle or a Kress, a vehicle for lifting a Slab (flat bar) at the rotation connection point used to control the grip to lift the Slab ( Flat bar steel) is damaged and cannot be used, WCE therefore, repairs it at the job site for a period of 4 days, saving time from the old method, which requires dismantling parts to repair at the workshop for more than 15 days. It also reduces the cost. Pay for repairs up to 50,000 baht.

Mr. Kittisak Mapanao, Managing Director of West Coast Engineering Company Limited or WCE is one of the SSI groups. Revealed that for more than 10 years WCE has been committed to providing maintenance and engineering services. both customers of affiliated companies and other general customers by providing many types of workgroups such as Engineering and Project Services Repair and production of mechanical parts Maintenance service and skilled labor service Service work in the assembly of metal structures, etc., and most recently, WCE repairs the shaft hole of the Kress or forklift Slab (flat bar) at the rotation connection point that is used to control the grip to lift the damaged Slab (flat bar). cannot be used to be able to return to normal use within a short time A team of engineers inspected the damage. analyze the problem and make repairs It takes only 4 days to repair and can be used normally. Compared to having to dismantle parts to repair at the workshop

Mr. Kittisak Mapanao has further disclosed the details of the work process. Until this success, There are steps to repair.

Repair inspection and design process Analysis of the damage that occurred The swivel connection area used to control the grip to lift the slab (flat bar) is damaged and cannot be used. therefore wanting to repair the shaft wear hole to have the center return to use

repair process Starting from digging, erosion (Gouging) the damaged part is melted next to the workpiece hole. Then clean the surface of the workpiece hole before repairing the hole. Then weld the inner surface mask with LD52 welding wire until the desired size is obtained. After that, the welds are inspected with a non-destructive inspection (NDT) method, i.e. Liquid Crack Detection (PT) and a Boring Mobile (Mobile Boring Machine) is installed in the center for boring the entire hole. 2 positions to get the size of the wear coordinates, which the Boring Mobile machine has high accuracy, making the coordinates accurate. The center alignment will make the balance of the dispersed force well. does not affect common components Then drill holes for lubricating grease. Bearing (bearings), check the size of the workpiece and assemble the Bush (casing) and Bearing to the fixing hole of the shaft to be repaired. This completes the repair process. The result of this repair was a Kress car.

“In this repair service, it helps reduce the cost and time of the customer’s operation and WCE has gained confidence from both quality service. It also increases competitiveness by using high standard Portable Machining, which promotes the company’s plan to create a new engineering service, Engineering Solution Onsite (E-SOS). that was launched this year This will definitely lead to the ability to produce parts to replace imports for various heavy industry groups,” said Kittisak.